Electronics

The Beetle 6 is a larger version of the BiKASE Beetle that has been stretched to accommodate the iPhone 6/6S Plus and other large mobile phones. Storage space underneath phone compartment for energy bar, wallet, keys, or tools. Mounts securely to the top tube using Velcro straps and shock cord around stem. - Pocket fits iPhone 6/6S Plus and other larger smart phones - Clear cover allows device visibility and operation - Mounts to top tube or stem - 2 multi positional straps & shock cord for mounting - Internal lastic stiffener and anti-slip fabric bottom - dual zippers - 8" x 4" x 2"

Take your riding to the next level with the addition of speed and cadence. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet

The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

Connect your desktop to CycleOps VirtualTraining.

The CycleOps ANT+ Speed or Cadence Sensor accurately tracks your speed and cadence and is used along with a power meter or with an ANT+-compatible cycling computer (power meters and ANT+ computers sold separately). This unit easily attaches on the frame next to your left crankarm and rear wheel to monitor and display your cadence or speed on your cycling computer of choice.

Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes

Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible. • Mount your hard-shell smart phone case to your bike • Allows for easy access of phone on stem or handlebar • Includes Insta-Mount, universal mount, and application grid • Blendr-compatible

The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.

Get the most out of your ride with the addition of speed and cadence. Whether you are a weekend warrior or data junkie we’ve got you covered. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet

Take your riding and your performance monitoring to the next level with Giant's Neos ANT+ Wireless Computer. This wireless ANT+ computer displays standard basics like speed, pace, distance and time, as well as tons of detailed information. Cadence is read by both current and average RPM, as well as heart rate in current, average, and max. The Neos records data for multiple rides and even monitors its life and warns you of a low battery. The backlight is nice for those early-morning starts, and it includes a stem/bar mount and an extended handlebar mount that sets the computer out front of the bars for easy viewing.

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

- Multi use clamp attaches to almost anything for hands free use of Tablet - Can be used with trainers and spin bikes - Holds iPad Mini, Kindle Fire, Nexus 7, Samsung Galaxy 7 - Includes touch screen friendly splash-proof bag - Universal clamp attaches to all round bars up to 1" diameter - Instant removal and installation of device - Neat rubber bumpers grip and help cushion device - Mini-Tablet Holder max dimensions: - Holds devices with max dims 8.6 x 5.5 x .625 | 220 x 140 x 15mm (H x W x D)

Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case. • Phone holder for 6-inch phones and smaller • Works with GoKASE attachments and brackets • Material: TPE & Shock Cord

Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

An elegant ANT+ cycling computer and sensor combo that’s simple to set up and intuitive to operate. Simple to set up, easy to use RIDEtime Elite Cycling Computer with DuoTrap S feeds you the metrics you need to rock every ride. The included DuoTrap S ANT+ sensor offers real-time speed and cadence so you can target more productive workouts and better recovery rides. Simple setup and an intuitive one-button interface get you riding faster, while features such as auto start/stop and auto light control help you take charge of your ride. Product details - 2” easy-to-read screen features a programmable backlight and customizable tri-field display - Features auto start/stop, auto clear, and auto light control with customizable hands-free scan modes - Tri-field display lets you see three functions at once (speed, cadence, heart rate, power) - Displays Trek Certified Service reminders based on your selected bicycle type - Displays distance (trip/total), time (clock, timer), and calories burned - Track your speed, heart rate, power, cadence (current, average, max) - Includes sleek out-front mount and is also Blendr compatible - Includes DuoTrap S sensor for clean integration into compatible Trek frames - Battery: CR2032 (Coin) - Weight: 40g

Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor

How fast, how far, and how long? Bontrager's wireless Trip 300 displays all of the essential info in large, easy-to-read text. You can mount it on your stem or your bars with the universal mount and the wireless setup keeps your cockpit tidy. •ANT+ enabled, 2.4 GHz digital signal •Current, average and maximum speed •Trip distance and programmable odometer •Current, average and maximum heart rate •Current, average and maximum cadence •Clock (12/24-hour) and total ride time with pacer •Includes computer mount

- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB

Features - Mounts underneath Contact SLR Aero Integrated handlebars - Adjustable length - Alloy construction - Hardware included

Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base

Universal Fit The XL Smartphone Holder is designed to securely hold iPhone 6 Plus, 6s Plus, Android Devices, and most larger style smartphones with protective cases. Compatible with devices/cases up to: 7.8 x 3.5 x 0.5 inches (H x W x D) Easy, Instant Removal Don't waste time prying your smartphone out of bulky holders or changing between cycling-specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Positioning On Your Terms Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Weather Protection Bag (Included) Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. Securing Cam Lock The securing cam lock adds additional security to your device during those extra bumpy moments.

Universal phone holder with quick release bracket for diameters 24mm to 38mm and works great with any phone. Fits with aftermarket cases for phones such as iPhone X, iPhone 6,7,8 & iPhone X, XR, XS, X Max, X Max R. Holder is on a ball socket so can rotate 360 degree’s for viewing at any angle. Can use as an out front mount and comes in handy when you have lights, or other devices mounted on handlebar, because will provide a few inches of clearance from bar. Works on Bicycles, E-Bikes, ATV’s, Motorcycles, Snowmobiles, and UTV’s.

Molded with Polycarbonate and Silicone rubber. Mounts to bike frame with rubber oring or use braze ons on bike. The 2 elastic bands will hold a phone, energy bar, pump, or sunglasses.