Parts & Accessories
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Saris' Bike Beam connects to your bike's seatpost and stem to simulate a standard top tube. It allows you to carry bicycles including full-suspension, women's, and children's bikes, and those with oversize tubing on your trunk or hitch-mounted carrier.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.
$13.99 - $15.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Add Saris' Freedom Long Wheelbase Bar to your Saris Freedom rack (sold separately) to carry an extra long wheelbase bicycle like a tandem or recumbent. The rack holds two bikes of up to 35 pounds each, and the Long Wheelbase Bar holds a bike that measures up to 57 inches axle to axle.
The Hollywood T975 is a 15mm thru-axle bike mount that bolts to any solid surface. Simply loosen your quick release lever and remove the axle from the front wheel. Place the bike's fork dropouts onto the 975 bike mount and slide the axle back through both the fork dropouts and the 975 bike mount. Tighten and secure.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
Hollywood's Sport Rider SE2 2-Bike Add-on Kit lets you carry an additional 2 bikes on your next adventure. It connects easily by sliding the add-on kit into the base unit (sold separately), inserting the attachment pin & clip, then tightening the lever. - Weight: 45 lbs - Capacity: 2 bikes, max 45 lbs per bike - Fits models HR1450, HR145R, and HRT220 - Space between bikes: 10 inches - Not to be used on any trailer, fifth wheel, or towed vehicle
The locking threaded hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.
Utilizing RockyMounts premium 3-axis anti wobble system; Allows BackStage, MonoRail, and SplitRail racks to fold flat against vehicles with spare tires. Works well for bike racks including Thule, Yakima & Kuat. Product Features: - Extends rack 8 inches from receiver - Only for 2-inch hitch receivers - Uses RockyMounts 3-axis anti wobble system - Reduces vehicle hitch capacity by 50% - Ideal for vehicles with spare tires, recessed hitches or van doors - Includes locking hitch pin with premium lock pod, can be keyed alike - 10lbs
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
- Converts 1 ¼" Hitch Receiver to fit 2" Hitch - Compatible with all current Saris Hitch Racks (contact Saris for older model compatibility).
Page 1 of 1